The following instructions will guide you through the SSL installation process on Office Communications 2007. If you have more than one server or device, you will need to install the certificate on each server or device you need to secure. If you still have not generated your certificate and completed the validation process, reference our CSR Generation Instructions and disregard the steps below.

What You’ll Need

1. Your server certificate

This is the certificate you received from the CA for your domain. You may have been sent this via email. If not, you can download it by visiting your Account Dashboard and clicking on your order.

2. Your intermediate certificates

These files allow the devices connecting to your server to identify the issuing CA. There may be more than one of these certificates. If you got your certificate in a ZIP folder, it should also contain the Intermediate certificate(s), which is sometimes referred to as a CA Bundle.

3. Your private key

This file should be on your server, or in your possession if you generated your CSR from a free generator tool. On certain platforms, such as Microsoft IIS, the private key is not immediately visible to you but the server is keeping track of it.

Installation Instructions

1. Launch your Office Communications Server 2007

Click Start, then select Programs, then Administrative Tools, and finally Office Communications Server 2007.

2. Expand your snap-in

Expand the Enterprise Edition Server snap-in.

3. Select Certificates

Right-click the correct Server and select Certificates.

4. Select Next

After selecting Next, choose Process the pending request and install the certificate.

5. Select your SSL Certificate

Find your SSL Certificate and hit next.

Congratulations! You’ve successfully installed your SSL certificate! To check your work, visit the website in your browser at https://yourdomain.tld and view the certificate/site information to see if HTTPS/SSL is working properly. Remember, you may need to restart your server for changes to take effect.

To check your server’s configurations more thoroughly, contact our Customer Experience Department for additional assistance.

Did this answer your question?